Means of Escape - Fire Safety Magazine

Home Article Archives Products Fire Safety Guides From The Editor Directory Recruitment Events Forums Advertise Contact Us

Twitter feed currently unavailable

Power for Emergency Lighting – Local vs Central

Want To Know More?

Ask us / the article supplier for additional information...

Name:

Surname:

Email:

Enquiry:

Receive Means of Escape's Newsletter

Emergency lighting is an obvious requirement during an evacuation situation, but what if the cabling from the power source to the point of use is damaged? A centralised system leaves critical emergency lighting at very real risk. Why leave huge lengths of site-wide cable vulnerable to theft, fire damage or a system circuit failure when ‘point of use’ power system installation can provide the guarantee you need in an emergency?

Power Systems International provides the Emergency Lighting Power System (ELPS). Protected with features to enable operation during an emergency, the ELPS will allow for safe and controlled building evacuation, by providing power to emergency lighting at the point where it is actually needed.

With 1, 2 or 3 feeds the system can stand in operational modes Active Online, Automatic Standby or Manual Standby - by means of authorised key switch use.

Although the system can be configured as a central system, positioned locally to the point of use the ELPS can simultaneously power Designated Evacuation Lifts, Emergency Lighting and Smoke Extraction fan motors for refuge areas. This cost effective package offers peace of mind should an emergency situation arise.

As part of the Power for Evacuation package, the system can even be used to simultaneously power Designated Evacuation Lifts, Emergency Lighting and Smoke Extraction motors for refuge areas.

ELPS Features

Low audilble noise
Low power consumption: approx 50 Watts in quiescent mode
Localised position: no need for costly site-wide cabling at risk of fire damage
Compact dimensions
No fuel cost/ spillage hazard/ bulk storage requirement / toxic smoke: as with a diesel generator
Regen energy absorption feature
BS EN 60146 compliant
Broad compatibility
Local / remote logic control
Wall mounting maintenance bypass unit
Remote control key switch
Power flow status mimic panel
Input and output flexible cables, plugs & sockets
Systems of 10kVA, 20kVA and 30kVA

For more information please contact Power Systems International Ltd

Email: info@powersystemsinternational.com or Tel: 01494 871544

www.powersystemsinternational.com

Directory listing: Power Systems International

Article Archives

Go Back